Press "Enter" to skip to content

Download 3rd International Symposium on High-Temperature by Tao Jiang, Jiann-Yang Hwang, Patrick Masset, Onuralp Yucel, PDF

By Tao Jiang, Jiann-Yang Hwang, Patrick Masset, Onuralp Yucel, Rafael Padilla, Guifeng Zhou

Proceedings of a symposium backed through the Pyrometallurgy Committee and the strength Committee of the Extraction and Processing department of TMS (The Minerals, Metals & fabrics Society)

Held throughout the TMS 2012 Annual assembly & Exhibition Orlando, Florida, USA
March 11-15, 2012

Content:

Show description

Read or Download 3rd International Symposium on High-Temperature Metallurgical Processing PDF

Best extraction & processing books

Asm Handbook Volume 22B: Metals Process Simulation

This guide offers perception into the mixing of modeling for simulation of producing processing. The metals is relocating towards an built-in computational fabrics engineering technique (ICME). this gives engineers with exact predictions of fabric and technique habit to prevent or decrease expensive trial-by-error and prototyping equipment of improvement.

Extractive Metallurgy of Copper, Fifth Edition

This multi-author new edition revises and updates the classic reference via William G. I. Davenport et al (winner of, between different awards, the 2003 AIME Mineral Educator of the yr Award "for inspiring scholars within the pursuit of clarity"), supplying absolutely up to date assurance of the copper construction process, encompassing issues as diversified as environmental know-how for wind and solar power transmission, therapy of waste byproducts, and recycling of digital scrap for power replacement expertise implementation.

Processing and Properties of Advanced Ceramics and Composites II, Volume 220

3 foreign symposia “Innovative Processing and Synthesis of Ceramics, Glasses  and Composites”, “Ceramic Matrix Composites”, and “Microwave Processing of Ceramics” have been held in the course of fabrics technological know-how & expertise 2009 convention & Exhibition (MS&T’09), Pittsburgh, PA, October 25-29, 2009. those symposia supplied a global discussion board for scientists, engineers, and technologists to debate and trade cutting-edge principles, info, and know-how on complicated equipment and ways for processing, synthesis and characterization of ceramics, glasses, and composites.

Reviews in Computational Chemistry, Volume 28

The stories in Computational Chemistry sequence brings jointly best professionals within the box to coach the newcomer and replace the specialist on subject matters situated round molecular modeling, akin to computer-assisted molecular layout (CAMD), quantum chemistry, molecular mechanics and dynamics, and quantitative structure-activity relationships (QSAR).

Extra resources for 3rd International Symposium on High-Temperature Metallurgical Processing

Example text

This gives the best stability in case of a partial repair of the tap hole arrangement. The interface from lining to well block is done by a low cement alumina/chromium-oxide castable. The tap hole itself - shown in Figure 2 - consists of a well block, an upper nozzle, the two plates (where the lower one is sliding) and a collector nozzle. The well block usually has the same life time than the rest of the lining and stays in the furnace whereas the plates and nozzles have to be exchanged on a regular basis.

The most efficient experiment in recovery of Ni and Co was P4 mixture with 30 g reductant and 100 g ore. 19 Figure 2. General Flowchart of the Process In the second experimental set, effect of process duration was carried out. P4 mixture was smelted in different process durations from 15 min. to 35 minutes. The same experimental and characterization procedures as in the first experimental set were employed for the second experimental set with different process times. The experiment PI, 100g ore and 5 g coke mixture, has the highest nickel concentration in the metal buttons.

Biogical and chemical processing of low-grade manganese ores," Minerals Engineering, 3(4) (1990), 307-318. 13. Mohammad Sh. , "Reductive dissolution of manganese ore in sulfuric acid in thepresence of iron metal," Hydrometallurgy, 90(2008), 207-212. 14. , "Reductive leaching of manganese from low-grade manganese ore in H2SO4 using cane molasses as reductant," Hydrometallurgy, 93(2008), 136-139. 15. D. , "Leaching of manganese ores using sawdust as a reductant," Minerals Engineering, 20(2007), 1293-1295.

Download PDF sample

Rated 4.01 of 5 – based on 38 votes